M-3615 slag-free zinc phosphating agent

-- Product Features--◆ M-3615 slag-free zinc phosphating agent can form a uniform and dense light gray conversion film on the surface of steel, and the conversion film has good anti-rust performance, which is equivalent to ordinary zinc phosphating.The M-3615 of slag-free zinc phosphating agent formed by the conversion film and a variety of coating between the good binding force.◆ M-3615 slag-free zinc phosphating agent can achieve limit slag-free, the industry's first, in the use of the process does not produce phosphating sediment.◆ M-3615 conversion film formed by slag-free zinc phosphating agent is strong, dense, uniform and does not hang ash.◆ M-3615 performance index of slag-free zinc phosphating film (powder coating as an example) ︰Adhesion 100-grid test: Level 0;Impact resistance test: 50kg-cm;Neutral salt spray test: 500 hours.◆ M-361 slag-free zinc phosphating agent is especially suitable for pretreatment of pipes, products requiring pickling and rust removal, and bare film rust prevention time.◆ M-361 slag-free zinc phosphating agent is suitable for soaking process (not suitable for spray process).

M-367 three-in-one phosphating agent

-- Product Features--◆ Oil removal, rust removal and phosphating are completed in one step, simplifying the pre-treatment steps.◆ After M-367 three-in-one phosphating treatment, water washing can be avoided, and the process can be simplified step by step.◆ When the steel surface is too rusted, it is difficult to completely remove the rust with only M-367 three-in-one.◆ The phosphating film formed M-367 three-in-one phosphating agent is colored, from blue-rainbow color.◆ Normal temperature treatment, without heating, easy to operate.◆ M-367 three-in-one phosphating can be soaked, sprayed or wiped.

M-368 electrophoresis phosphating agent

-- Product Features--◆ M-368 electrophoresis phosphating agent, also known as ternary phosphating agent, the formation of phosphating film is very dense, has good acid and alkali resistance, especially suitable for phosphating before electrophoresis.◆ The following four chemicals will be used in the production process of M-368 electrophoresis phosphating agent: solvent A, cylinder opener B, replenisher C and accelerator. Among them, solvent A and cylinder opener B are only used for phosphating new slotting, and only phosphating replenisher C is needed for replenishment at ordinary times.◆ M-368 electrophoresis phosphating agent requires certain temperature conditions, 40-55 ℃ to ensure the formation of uniform and complete phosphating film.◆ M-368 electrophoretic phosphating and electrophoretic paint can improve the binding force, impact resistance and corrosion resistance of electrophoretic paint layer.◆ Coating performance after matching M-368 electrophoresis phosphating and cathodic electrophoresis paint:Adhesion 100 test level 0;Impact resistance test 50kg cm;Neutral salt spray test for 1000 hours.

M-366 anti-rust phosphating agent

-- Product Features--◆ Phosphating film thickness 5-6μm.◆ Phosphating film has good anti-rust performance. After the phosphating film is coated with anti-rust oil, there is no rust in neutral salt spray test for 48 hours, and no rust in indoor storage for 1 year.◆ medium temperature use, use temperature 65-75 ℃, phosphating time 15-20min.◆ In order to prolong the anti-rust time, oil treatment should be done after phosphating to improve the anti-rust ability.The phosphating film has good adhesion, for the outer layer of glue or paint to provide a good binding force.◆ The phosphating tank solution is less slag and stable, and can be used continuously after being added every certain cycle.

M-366 anti-rust phosphating agent

-- Product Features--◆ Phosphating film thickness 5-6μm.◆ Phosphating film has good anti-rust performance. After the phosphating film is coated with anti-rust oil, there is no rust in neutral salt spray test for 48 hours, and no rust in indoor storage for 1 year.◆ medium temperature use, use temperature 65-75 ℃, phosphating time 15-20min.◆ In order to prolong the anti-rust time, oil treatment should be done after phosphating to improve the anti-rust ability.The phosphating film has good adhesion, for the outer layer of glue or paint to provide a good binding force.◆ The phosphating tank solution is less slag and stable, and can be used continuously after being added every certain cycle.

M-365 black manganese phosphating agent

-- Product Features--◆ M-365 black manganese phosphating agent is a pure manganese phosphating solution, phosphating film is pure black.◆ M-365 black manganese phosphating film thickness is 8-12μm, thick film type phosphating.◆ M-365 black manganese series phosphating film antirust performance is very outstanding, after coated with antirust oil after storage for more than 1 year does not rust, neutral salt spray test up to 96 hours.The M-365 black manganese phosphating agent is a heating type phosphating agent, and the process conditions are 90-95 degrees C.◆ After M-365 black manganese phosphating brush or immersion anti-rust oil treatment, can significantly improve its anti-rust performance of 4-5 times.◆ Suitable for immersion treatment process.

M-363 wire drawing phosphating agent

-- Product Features--◆ Special phosphating agent for steel wire drawing.◆ M-363 wire drawing phosphating agent to form a medium thickness phosphating film 4-6μm, and the phosphating film is porous.◆ M-363 wire-drawing phosphating film is porous and can absorb a large amount of lubricating substances, such as soap.◆ After the M-363 wire drawing phosphating film absorbs and firmly locks the lubricating substance, the steel wire is endowed with good lubricating performance and anti-rust performance, so as to ensure that the iron wire is not strained or gray during the wire drawing process, and the wire drawing is not stored after rust.◆ M-363 wire drawing phosphating agent for heating type phosphating agent, heating 60-70 ℃ use.◆ M-363 wire drawing phosphating agent is suitable for soaking treatment process.

M-361 zinc phosphating agent

-- Product Features--◆ M-361 zinc phosphating agent can form a uniform and dense light gray conversion film on the surface of steel, and the conversion film has good anti-rust performance.There is a good binding force between the conversion film formed by M-361 zinc phosphating agent and various paint coatings.◆ M-361 zinc phosphating agent is a low-slag phosphating film, a certain amount of phosphating sediment will still be produced during use.◆ The conversion film formed by M-361 zinc phosphating agent is strong, dense, uniform and does not hang ash.◆ M-361 zinc phosphating film performance index (powder coating as an example):Adhesion 100-grid test: Level 0;Impact resistance test: 50kg · cm;Neutral salt spray test: 500 hours.◆ M-361 zinc phosphating agent is especially suitable for pre-treatment of pipes, products requiring pickling and rust removal, and bare film rust prevention time.◆ M-361 zinc phosphating agent is suitable for spraying or soaking process.

M-360 iron phosphating agent

-- Product Features--The phosphating film formed by M-360 iron phosphating agent has good rust resistance.◆ According to the different phosphating treatment time, the phosphating film color will show blue-purple-blue-rainbow color and other colors, so it is also called color phosphorus.The M-360 iron phosphate film and a variety of coatings with good binding force.◆ M-360 iron phosphating process control is simple and easy, usually only need to control PH.◆ M-360 iron-based phosphating agent is used at room temperature without heating.◆ The sediment produced by M-360 iron-based phosphating agent is far less than that of zinc-based phosphating, only about 1/50 of zinc-based phosphating sediment.◆ M-360 iron-based coating performance after phosphating:Adhesion 100-grid test: Level 0;Impact resistance test: 50kg · cm;Fog test: 200 hours.◆ M-360 iron phosphating is suitable for spraying, soaking and swimming immersion treatment.

M-5226 anti-rust sealant

-- Product Features--◆ M-5226 anti-rust sealant is composed of a variety of organic anti-rust film forming agent, water-based resin, antioxidant, accelerator and other compounds.◆ M-5226 anti-rust sealant is a water-based anti-rust agent, which can be miscible with water in any proportion.◆ M-5226 anti-rust sealant has good wetting agent, permeability and leveling when in contact with metal surface, and is firmly combined by chemical bond.According to the chemical characteristics of the metal surface, the M-5226 of anti-rust sealant can passivate and seal the metal surface to form a closed anti-rust film. The closed film itself has good anti-rust performance, and it can also isolate the external moisture and oxygen from the oxidation reaction with the metal substrate.◆ normal temperature use, no heating, reaction time 10-30 seconds, fast completion of the closure.◆ M-5226 anti-rust sealant is suitable for immersion treatment process.