Products
Contact Us
Address: No.1, Lian'an Road, Fu'an Industrial Zone, Lexu Town, Shunde District, Foshan City, Guangdong Province
Pay attention to our public number.
M-825 copper antitarnish agent
-- Product Features--According to the chemical characteristics of copper oxidation discoloration in the air, the M-825 of copper anti-discoloration agent can effectively solve the problem of copper discoloration.◆ M-825 selection of a variety of imported anti-corrosion raw material reaction compound, has a very excellent anti-discoloration ability.◆ Environmentally friendly copper treatment process, free of chromium and heavy metals.The operation control is simple, normal temperature soak for 2 minutes, usually only need to detect the PH value.Concentrated liquid, can be mixed with water 5-10 times the use.
-- Product Features--◆ to adapt to a wide range of brass, copper, bronze, white copper and other copper materials can get a good bright effect.◆ M-8231 copper polishing agent will not appear after polishing fog, hair, uneven phenomenon, the appearance of bright, uniform.◆ M-8231 copper polishing agent can remove copper oxide skin, oxide skin is too thick, can be appropriate to extend the polishing time. Easy to use, just soak for 30-60 seconds to achieve a good light effect.◆ After a certain period of time, the polishing agent composition will be consumed and the concentration will be reduced. At this time, a new M-8231 copper polishing agent supplement can be added to the consumed concentration to restore the original polishing effect.◆ After a certain period of time, with the dissolution of copper, the concentration of copper ions will increase. When a certain concentration is reached, all polishing fluids must be replaced.◆ After the M-8231 copper is polished, anti-discoloration treatment is required to achieve lasting brightness.The M-8231 copper polishing agent for immersion treatment process (not applicable to spray process).
M-8213 copper neutral environmental cleaning agent
-- Product Features--◆ Neutral environmental protection, working fluid PH = 5-6.Copper cleaning agent technology new breakthrough, alternative acid cleaning agent.The cutting oil, drawing oil, anti rust oil, emulsified oil, animal and vegetable oil and other oil has a good removal effect.◆ M-8213 copper neutral cleaning agent has the dual removal of oil and oxide skin, so it has a certain bright effect.◆ M-8213 copper neutral cleaning agent need to add 40-60C, ultrasonic use.The M-8213 is suitable for ultrasonic cleaning process.
-- Product Features--◆ M-8211 copper cleaning agent by a variety of inorganic acid, organic acid, complexing agent, surface active agent scientific compound.◆ M-8211 copper cleaning agent can remove anti-rust oil, cutting oil, drawing oil, mineral oil, animal and vegetable oil and other grease and dirt.◆ M-8211 copper cleaning agent is a water-soluble concentrated product, which can be mutually soluble with water in any proportion, and can be used with water 20 times.◆ M-8211 copper cleaning agent in the removal of copper surface oil at the same time, can also remove a certain degree of copper surface oxide skin, has a certain bright effect.◆ M-8211 copper cleaning agent can be used under normal temperature process conditions, heating to 35-50 ℃ cleaning agent effect will be better.◆ M-8211 copper cleaning agent is used for degreasing and descaling before copper chemical polishing or copper anti-discoloration treatment in the post-process. M-8211 copper cleaning agent is suitable for soaking and ultrasonic treatment process.
-- Product Features--◆ M-826 copper sealing agent can form a colorless transparent organic sealing film with a certain thickness on the copper surface.◆ M-826 copper sealing film can effectively isolate the outside oxygen, moisture and copper substrate contact, so as to achieve anti-discoloration treatment.◆ M-826 copper sealing film relative to the conversion of copper passivation film, anti-discoloration performance is better, longer, sealed after treatment sealed to save up to 1 years without discoloration.Copper material treated with M-826 copper sealer can increase the corrosion resistance of copper, and the neutral salt spray test can reach 96 hours.◆ After copper is treated with M-826 copper sealer, the conductivity of the copper surface will be reduced, so the M-826 copper sealer is not suitable for copper parts with conductivity requirements and welding requirements.◆ M-826 copper sealer is suitable for soaking process, and small parts need to use the dryer to dry the product.
-- Product Features--◆ The product is environmentally friendly, PH = 7.5-8.5 is close to neutral, and does not contain phosphorus and heavy metals.◆ M-820 copper degreasing agent by a variety of inorganic salts, complexing agents, surfactants, corrosion inhibitors and other scientific compounding, can quickly remove cutting oil, anti-rust oil, drawing oil, oil, peanut oil and other mineral oil and animal and vegetable oil.◆ M-820 copper degreasing agent will not produce any corrosion to copper, copper after degreasing can maintain copper color.◆ M-820 copper degreasing agent can be used at room temperature, heating to 40-60 ° C is the best.◆ M-820 copper degreasing agent can not remove the copper surface oxide skin, if you need to clean to remove the copper oxide skin can choose to M-8211 copper cleaning agent.◆ M-820 copper degreasing agent is suitable for spraying, soaking and ultrasonic process.
Foshan Shunde Meisoon Metal Surface Technology Co,.Ltd
National service hotline: +86-757-22900243
Address: No.1, Lian'an Road, Fu'an Industrial Zone, Lexu Town, Shunde District, Foshan City, Guangdong Province
WeChat Public Number
Mobile phone version
Copyright Foshan Shunde Meisoon Metal Surface Technology Co,.Ltd. Website Construction:China Enterprise Power Shunde SEO