M-8211 copper cleaning agent

-- Product Features--◆ M-8211 copper cleaning agent by a variety of inorganic acid, organic acid, complexing agent, surface active agent scientific compound.◆ M-8211 copper cleaning agent can remove anti-rust oil, cutting oil, drawing oil, mineral oil, animal and vegetable oil and other grease and dirt.◆ M-8211 copper cleaning agent is a water-soluble concentrated product, which can be mutually soluble with water in any proportion, and can be used with water 20 times.◆ M-8211 copper cleaning agent in the removal of copper surface oil at the same time, can also remove a certain degree of copper surface oxide skin, has a certain bright effect.◆ M-8211 copper cleaning agent can be used under normal temperature process conditions, heating to 35-50 ℃ cleaning agent effect will be better.◆ M-8211 copper cleaning agent is used for degreasing and descaling before copper chemical polishing or copper anti-discoloration treatment in the post-process. M-8211 copper cleaning agent is suitable for soaking and ultrasonic treatment process.

M-826 copper sealer

-- Product Features--◆ M-826 copper sealing agent can form a colorless transparent organic sealing film with a certain thickness on the copper surface.◆ M-826 copper sealing film can effectively isolate the outside oxygen, moisture and copper substrate contact, so as to achieve anti-discoloration treatment.◆ M-826 copper sealing film relative to the conversion of copper passivation film, anti-discoloration performance is better, longer, sealed after treatment sealed to save up to 1 years without discoloration.Copper material treated with M-826 copper sealer can increase the corrosion resistance of copper, and the neutral salt spray test can reach 96 hours.◆ After copper is treated with M-826 copper sealer, the conductivity of the copper surface will be reduced, so the M-826 copper sealer is not suitable for copper parts with conductivity requirements and welding requirements.◆ M-826 copper sealer is suitable for soaking process, and small parts need to use the dryer to dry the product.

M-820 copper degreaser

-- Product Features--◆ The product is environmentally friendly, PH = 7.5-8.5 is close to neutral, and does not contain phosphorus and heavy metals.◆ M-820 copper degreasing agent by a variety of inorganic salts, complexing agents, surfactants, corrosion inhibitors and other scientific compounding, can quickly remove cutting oil, anti-rust oil, drawing oil, oil, peanut oil and other mineral oil and animal and vegetable oil.◆ M-820 copper degreasing agent will not produce any corrosion to copper, copper after degreasing can maintain copper color.◆ M-820 copper degreasing agent can be used at room temperature, heating to 40-60 ° C is the best.◆ M-820 copper degreasing agent can not remove the copper surface oxide skin, if you need to clean to remove the copper oxide skin can choose to M-8211 copper cleaning agent.◆ M-820 copper degreasing agent is suitable for spraying, soaking and ultrasonic process.

M-367 three-in-one phosphating agent

-- Product Features--◆ Oil removal, rust removal and phosphating are completed in one step, simplifying the pre-treatment steps.◆ After M-367 three-in-one phosphating treatment, water washing can be avoided, and the process can be simplified step by step.◆ When the steel surface is too rusted, it is difficult to completely remove the rust with only M-367 three-in-one.◆ The phosphating film formed M-367 three-in-one phosphating agent is colored, from blue-rainbow color.◆ Normal temperature treatment, without heating, easy to operate.◆ M-367 three-in-one phosphating can be soaked, sprayed or wiped.

M-368 electrophoresis phosphating agent

-- Product Features--◆ M-368 electrophoresis phosphating agent, also known as ternary phosphating agent, the formation of phosphating film is very dense, has good acid and alkali resistance, especially suitable for phosphating before electrophoresis.◆ The following four chemicals will be used in the production process of M-368 electrophoresis phosphating agent: solvent A, cylinder opener B, replenisher C and accelerator. Among them, solvent A and cylinder opener B are only used for phosphating new slotting, and only phosphating replenisher C is needed for replenishment at ordinary times.◆ M-368 electrophoresis phosphating agent requires certain temperature conditions, 40-55 ℃ to ensure the formation of uniform and complete phosphating film.◆ M-368 electrophoretic phosphating and electrophoretic paint can improve the binding force, impact resistance and corrosion resistance of electrophoretic paint layer.◆ Coating performance after matching M-368 electrophoresis phosphating and cathodic electrophoresis paint:Adhesion 100 test level 0;Impact resistance test 50kg cm;Neutral salt spray test for 1000 hours.

M-366 anti-rust phosphating agent

-- Product Features--◆ Phosphating film thickness 5-6μm.◆ Phosphating film has good anti-rust performance. After the phosphating film is coated with anti-rust oil, there is no rust in neutral salt spray test for 48 hours, and no rust in indoor storage for 1 year.◆ medium temperature use, use temperature 65-75 ℃, phosphating time 15-20min.◆ In order to prolong the anti-rust time, oil treatment should be done after phosphating to improve the anti-rust ability.The phosphating film has good adhesion, for the outer layer of glue or paint to provide a good binding force.◆ The phosphating tank solution is less slag and stable, and can be used continuously after being added every certain cycle.

M-366 anti-rust phosphating agent

-- Product Features--◆ Phosphating film thickness 5-6μm.◆ Phosphating film has good anti-rust performance. After the phosphating film is coated with anti-rust oil, there is no rust in neutral salt spray test for 48 hours, and no rust in indoor storage for 1 year.◆ medium temperature use, use temperature 65-75 ℃, phosphating time 15-20min.◆ In order to prolong the anti-rust time, oil treatment should be done after phosphating to improve the anti-rust ability.The phosphating film has good adhesion, for the outer layer of glue or paint to provide a good binding force.◆ The phosphating tank solution is less slag and stable, and can be used continuously after being added every certain cycle.

M-365 black manganese phosphating agent

-- Product Features--◆ M-365 black manganese phosphating agent is a pure manganese phosphating solution, phosphating film is pure black.◆ M-365 black manganese phosphating film thickness is 8-12μm, thick film type phosphating.◆ M-365 black manganese series phosphating film antirust performance is very outstanding, after coated with antirust oil after storage for more than 1 year does not rust, neutral salt spray test up to 96 hours.The M-365 black manganese phosphating agent is a heating type phosphating agent, and the process conditions are 90-95 degrees C.◆ After M-365 black manganese phosphating brush or immersion anti-rust oil treatment, can significantly improve its anti-rust performance of 4-5 times.◆ Suitable for immersion treatment process.

M-363 wire drawing phosphating agent

-- Product Features--◆ Special phosphating agent for steel wire drawing.◆ M-363 wire drawing phosphating agent to form a medium thickness phosphating film 4-6μm, and the phosphating film is porous.◆ M-363 wire-drawing phosphating film is porous and can absorb a large amount of lubricating substances, such as soap.◆ After the M-363 wire drawing phosphating film absorbs and firmly locks the lubricating substance, the steel wire is endowed with good lubricating performance and anti-rust performance, so as to ensure that the iron wire is not strained or gray during the wire drawing process, and the wire drawing is not stored after rust.◆ M-363 wire drawing phosphating agent for heating type phosphating agent, heating 60-70 ℃ use.◆ M-363 wire drawing phosphating agent is suitable for soaking treatment process.

M-361 zinc phosphating agent

-- Product Features--◆ M-361 zinc phosphating agent can form a uniform and dense light gray conversion film on the surface of steel, and the conversion film has good anti-rust performance.There is a good binding force between the conversion film formed by M-361 zinc phosphating agent and various paint coatings.◆ M-361 zinc phosphating agent is a low-slag phosphating film, a certain amount of phosphating sediment will still be produced during use.◆ The conversion film formed by M-361 zinc phosphating agent is strong, dense, uniform and does not hang ash.◆ M-361 zinc phosphating film performance index (powder coating as an example):Adhesion 100-grid test: Level 0;Impact resistance test: 50kg · cm;Neutral salt spray test: 500 hours.◆ M-361 zinc phosphating agent is especially suitable for pre-treatment of pipes, products requiring pickling and rust removal, and bare film rust prevention time.◆ M-361 zinc phosphating agent is suitable for spraying or soaking process.

M-360 iron phosphating agent

-- Product Features--The phosphating film formed by M-360 iron phosphating agent has good rust resistance.◆ According to the different phosphating treatment time, the phosphating film color will show blue-purple-blue-rainbow color and other colors, so it is also called color phosphorus.The M-360 iron phosphate film and a variety of coatings with good binding force.◆ M-360 iron phosphating process control is simple and easy, usually only need to control PH.◆ M-360 iron-based phosphating agent is used at room temperature without heating.◆ The sediment produced by M-360 iron-based phosphating agent is far less than that of zinc-based phosphating, only about 1/50 of zinc-based phosphating sediment.◆ M-360 iron-based coating performance after phosphating:Adhesion 100-grid test: Level 0;Impact resistance test: 50kg · cm;Fog test: 200 hours.◆ M-360 iron phosphating is suitable for spraying, soaking and swimming immersion treatment.

M-5226 anti-rust sealant

-- Product Features--◆ M-5226 anti-rust sealant is composed of a variety of organic anti-rust film forming agent, water-based resin, antioxidant, accelerator and other compounds.◆ M-5226 anti-rust sealant is a water-based anti-rust agent, which can be miscible with water in any proportion.◆ M-5226 anti-rust sealant has good wetting agent, permeability and leveling when in contact with metal surface, and is firmly combined by chemical bond.According to the chemical characteristics of the metal surface, the M-5226 of anti-rust sealant can passivate and seal the metal surface to form a closed anti-rust film. The closed film itself has good anti-rust performance, and it can also isolate the external moisture and oxygen from the oxidation reaction with the metal substrate.◆ normal temperature use, no heating, reaction time 10-30 seconds, fast completion of the closure.◆ M-5226 anti-rust sealant is suitable for immersion treatment process.

M-5223 efficient environmental protection antirust agent (steel)

-- Product Features--Environmental protection, does not contain sodium nitrite.◆ The M-5223 does not contain any inorganic ingredients, and there is no white spot of any salt residue after drying.◆ The anti-rust film is colorless and transparent, and can be directly painted and dusted after anti-rust treatment, with good binding force.◆ It is used for temporary anti-rust after parts are cleaned. It is not suitable for long-term anti-rust of parts. If long-term anti-rust is required, anti-rust oil should be applied.The antirust effect is better than that of sodium nitrite system antirust agent.

M-5221 Passivation Rust Inhibitor (Steel)

-- Product Features--◆ M-5221 passivation rust inhibitor is made of a variety of inorganic alkali, inorganic rust inhibitor, organic rust inhibitor, passivation agent and other compounding.◆ M-5221 passivation anti-rust agent has a good passivation effect on steel, reducing the surface activity of steel, and at the same time covering the surface with a layer of organic anti-rust film to achieve excellent anti-rust performance.◆ M-5221 passivation anti-rust agent has a good neutralization effect on the workpiece after pickling, and is the preferred anti-rust agent after steel pickling.◆ M-5221 passivation antirust agent has good antirust performance, antirust time 7-10 days.◆ M-5221 passivation anti-rust agent is suitable for immersion and spray treatment process.

M-5113 efficient environmental protection rust remover

-- Product Features--◆ Neutral derusting, working fluid PH = 6-7, used to replace the traditional hydrochloric acid, sulfuric acid strong acid derusting.◆ No pungent smell, no harm to human body, and improve the operating environment.◆ Using the latest chelating, penetration, stripping rust removal principle, rust removal speed is not lower than hydrochloric acid, sulfuric acid.◆ Only for rust dissolution, stripping, no corrosion to the steel matrix.◆ can be used at room temperature, appropriate heating effect is better.