M-3615 slag-free zinc phosphating agent

-- Product Features--◆ M-3615 slag-free zinc phosphating agent can form a uniform and dense light gray conversion film on the surface of steel, and the conversion film has good anti-rust performance, which is equivalent to ordinary zinc phosphating.The M-3615 of slag-free zinc phosphating agent formed by the conversion film and a variety of coating between the good binding force.◆ M-3615 slag-free zinc phosphating agent can achieve limit slag-free, the industry's first, in the use of the process does not produce phosphating sediment.◆ M-3615 conversion film formed by slag-free zinc phosphating agent is strong, dense, uniform and does not hang ash.◆ M-3615 performance index of slag-free zinc phosphating film (powder coating as an example) ︰Adhesion 100-grid test: Level 0;Impact resistance test: 50kg-cm;Neutral salt spray test: 500 hours.◆ M-361 slag-free zinc phosphating agent is especially suitable for pretreatment of pipes, products requiring pickling and rust removal, and bare film rust prevention time.◆ M-361 slag-free zinc phosphating agent is suitable for soaking process (not suitable for spray process).

M-206 magnesium alloy passivator

-- Product Features--The chemical properties of magnesium lively, easily oxidized or corroded in the air, M-206 magnesium alloy passivation agent for magnesium unique chemical characteristics of research and development of passivation agent.◆ M-206 magnesium alloy passivator does not contain chromium, which meets the requirements of environmental protection treatment process.◆ M-206 magnesium alloy passivation film has good corrosion resistance and can be used for direct corrosion of magnesium alloy or passivation treatment before coating.◆ Excellent adhesion between the conversion film and the subsequent paint or powder coating.◆ Corrosion resistance of M-206 magnesium alloy passivation film:Neutral salt spray test for 24 hours.◆ After M-206 magnesium alloy passivation film coating, the coating performance is as follows:Adhesion 100-grid test: acceptable;Boiling test for 2 hours: acceptable;Neutral salt spray test for 720 hours.◆ Suitable for immersion treatment process.

M-208 magnesium alloy table adjustment

-- Product Features--◆ by a variety of efficient complexing agent, oxidant, activator, ash agent compound.The magnesium alloy surface activation after the rapid dissolution of black ash removal.◆ It needs to be used under heating 70-80 ℃ and ultrasonic conditions.◆ Suitable for ultrasonic treatment process.

Sealant for M-209 magnesium alloy

-- Product Features--The chemical properties of magnesium lively, easily oxidized or corroded in the air, M-206 magnesium alloy passivation agent for magnesium unique chemical characteristics of research and development of passivation agent.◆ M-206 magnesium alloy passivator does not contain chromium, which meets the requirements of environmental protection treatment process.◆ M-206 magnesium alloy passivation film has good corrosion resistance and can be used for direct corrosion of magnesium alloy or passivation treatment before coating.◆ Excellent adhesion between the conversion film and the subsequent paint or powder coating.◆ Corrosion resistance of M-206 magnesium alloy passivation film:Neutral salt spray test for 24 hours.◆ After M-206 magnesium alloy passivation film coating, the coating performance is as follows:Adhesion 100-grid test: acceptable;Boiling test for 2 hours: acceptable;Neutral salt spray test for 720 hours.◆ Suitable for immersion treatment process.

M-205 magnesium alloy activator

-- Product Features--It is composed of a variety of organic acids, wetting agents, complexing agents and accelerators.◆ It has a good dissolution and removal effect on the oxide layer and corrosion marks on the surface of magnesium alloy.The weak acid, will not cause corrosion of magnesium alloy.◆ Appropriate heating to 30-50 ℃, the reaction speed will be accelerated (can also be used at room temperature, time control in 3-5 minutes).◆ Suitable for immersion treatment process.

M-106 zinc alloy passivator

-- Product Features--◆ Special passivation agent developed for the unique chemical characteristics of zinc alloy such as loose and easy oxidation.◆ M-106 zinc alloy passivator does not contain chromium and phosphorus, which meets the requirements of environmental protection treatment process and effectively replaces the traditional chromium-containing passivation treatment.◆ M-106 zinc alloy passivation agent to form the conversion film and subsequent paint or spray powder coating has excellent binding force.After M-106 zinc alloy passivation treatment, the original chemical activity of the zinc alloy surface is changed, and the conversion film has good corrosion resistance, so as to improve the salt spray resistance (I. e. corrosion resistance) of the subsequent paint and powder coating.◆ Normal temperature treatment, easy process control, only need to control the PH value in the production process to meet the process quality requirements.After M-106 zinc alloy passivation after powder spraying treatment, coating performance is as follows:Adhesion 100-grid test: acceptable;Coating neutral salt spray test for 500 hours.Suitable for soaking or spray treatment process.

M-105 zinc alloy table dispensing

-- Product Features--◆ by a variety of organic acids, complexing agent, activator, oxidation removal agent and other compounding.◆ can effectively remove the zinc alloy surface oxide layer, in order to achieve the purpose of zinc alloy surface clean.◆ Used for surface activation treatment before zinc alloy passivation.Suitable for spray or immersion treatment process.

M-6681 aluminum chromium-free passivator

-- Product Features--◆ The product is completely chromium-free and meets the requirements of environmental protection discharge. The wastewater can meet the discharge standard only by simple neutralization and precipitation treatment.◆ The color of the conversion film will change due to material differences. The conversion film formed by aluminum profiles and aluminum materials is colorless and transparent, and the conversion film formed by cast aluminum materials will be yellow to blue-purple.The conversion film and coating (paint, powder, electrophoresis) has excellent binding force.◆ The conversion film has good corrosion resistance, and the aluminum material can be prevented from regenerating corrosion spots (white spots or moldy) after passivation treatment.The conversion film combined with the coating can improve the salt spray resistance and boiling resistance of the coating.◆ wide applicability, can be applied to aluminum, aluminum, cast aluminum, iron and aluminum mixed material.◆ Coating performance:Adhesion test level 0;Impact resistance test 50kg-cm;High pressure boiling resistance test for 2 hours;Neutral salt spray test for 1000 hours.Suitable for soaking or spray treatment process.

M-662 aluminum trivalent chromium passivator

-- Product Features--◆ The product does not contain hexavalent chromium and complies with RoHS requirements. It is used to replace traditional hexavalent chromium passivation.The passivation film formed has very good corrosion resistance, and the passivation film can be used for direct anti-corrosion of aluminum alloy.At the same time, the passivation film has a good binding force with various coatings, which can be used as the bottom layer of coating to improve the coating binding force.◆ The appearance of the passivation film will have a certain color, and the color will be different due to different alloy compositions.◆ The corrosion resistance of the conversion film is obviously better than that of the chromium-free passivation film, and the salt spray test of the bare film is more than 5 times that of the chromium-free passivation film.◆ Performance of conversion film:Bare film neutral salt spray for 100 hours;Coating adhesion test level 0;Impact resistance test of coating: 50kg · cm;Coating neutral salt spray test for 1000 hours.Suitable for spray or immersion treatment process.

M-6683 aluminum chromium-free passivator (no water washing)

-- Product Features--◆ M-6683 aluminum chromium-free passivation after washing, reduce waste water discharge, save water.◆ M-6683 aluminum chromium-free passivation treatment time is short, only 30-60 seconds can be intact film, high production efficiency.◆ M-6683 aluminum chromium-free passivator is super concentrated passivator, which can process 500-700 square meters of aluminum per kilogram of M-6683.◆ M-6683 aluminum chromium-free passivator tank solution is better prepared with pure water.◆ M-6683 aluminum chromium-free passivation agent does not contain phosphorus, chromium and heavy metals, new environmental protection aluminum passivation process.◆ M-6683 aluminum chromium-free passivation process is suitable for aluminum coating the bottom layer, not suitable for aluminum direct corrosion.◆ Coating performance after painting:Coating adhesion test: Grade 0;High pressure water boiling test of coating for 2 hours;Coating neutral salt spray test 1000 hours (powder coating).◆ M-6683 water-free passivation is suitable for spray, mixed coating or soaking process.

M-6612 aluminum chromate (colorless film)

-- Product Features--◆ M-6612 aluminum chromating agent is hexavalent chromium passivation.The conversion film formed by M-6612 aluminum chromate is colorless and transparent (cast aluminum may have color differences on the rough surface due to different alloy compositions).The conversion film formed by M-6612 aluminum chromate has high corrosion resistance, and the bare film is in neutral salt spray for 96 hours. It can be used for direct corrosion protection of aluminum and its alloys.◆ M-6612 aluminum chromating agent can be used for passivation of iron and aluminum products, and has good antirust effect on steel materials.The conversion film formed by the M-6612 of aluminum chromate can also be used as a coating with a good binding force between the bottom layer and the coating.◆ Suitable temperature for treatment: normal temperature -45 ℃, the conversion film formed by proper heating will be more compact, and the conversion film thickness can be increased at the same time, thereby increasing the corrosion resistance of the conversion film.◆ M-6612 aluminum passivator is suitable for the passivation treatment of aluminum plate, aluminum profile, cast aluminum, iron and aluminum.◆ M-6612 aluminum passivator is suitable for spraying or soaking process.

M-6611 aluminum chromating agent (golden film)

-- Product Features--◆ M-6611 aluminum chromating agent is hexavalent chromium passivating agent.◆ The passivation film formed M-6611 aluminum chromate has high corrosion resistance, and the bare film is neutral salt spray for 96 hours, which can be used for direct corrosion prevention of aluminum and its alloys.◆ The passivation film formed by the M-6611 can be used for coating the bottom layer and direct anti-corrosion. When used as the bottom layer of coating, it has a good binding force with the coating.◆ The conversion film formed M-6611 aluminum chromate is golden yellow.◆ M-6611 aluminum chromating agent is suitable for passivation treatment of aluminum profiles, aluminum plates, cast aluminum and other aluminum and its alloys.◆ The processing temperature is normal temperature -45 ° C, appropriate heating is conducive to the formation of a more dense conversion film, but also can increase the conversion film thickness to a certain extent, thereby increasing the corrosion resistance of the conversion film.◆ M-6611 aluminum chromating agent is suitable for spraying or soaking process.

M-825 copper antitarnish agent

-- Product Features--According to the chemical characteristics of copper oxidation discoloration in the air, the M-825 of copper anti-discoloration agent can effectively solve the problem of copper discoloration.◆ M-825 selection of a variety of imported anti-corrosion raw material reaction compound, has a very excellent anti-discoloration ability.◆ Environmentally friendly copper treatment process, free of chromium and heavy metals.The operation control is simple, normal temperature soak for 2 minutes, usually only need to detect the PH value.Concentrated liquid, can be mixed with water 5-10 times the use.

M-8231 copper polish

-- Product Features--◆ to adapt to a wide range of brass, copper, bronze, white copper and other copper materials can get a good bright effect.◆ M-8231 copper polishing agent will not appear after polishing fog, hair, uneven phenomenon, the appearance of bright, uniform.◆ M-8231 copper polishing agent can remove copper oxide skin, oxide skin is too thick, can be appropriate to extend the polishing time. Easy to use, just soak for 30-60 seconds to achieve a good light effect.◆ After a certain period of time, the polishing agent composition will be consumed and the concentration will be reduced. At this time, a new M-8231 copper polishing agent supplement can be added to the consumed concentration to restore the original polishing effect.◆ After a certain period of time, with the dissolution of copper, the concentration of copper ions will increase. When a certain concentration is reached, all polishing fluids must be replaced.◆ After the M-8231 copper is polished, anti-discoloration treatment is required to achieve lasting brightness.The M-8231 copper polishing agent for immersion treatment process (not applicable to spray process).

M-8213 copper neutral environmental cleaning agent

-- Product Features--◆ Neutral environmental protection, working fluid PH = 5-6.Copper cleaning agent technology new breakthrough, alternative acid cleaning agent.The cutting oil, drawing oil, anti rust oil, emulsified oil, animal and vegetable oil and other oil has a good removal effect.◆ M-8213 copper neutral cleaning agent has the dual removal of oil and oxide skin, so it has a certain bright effect.◆ M-8213 copper neutral cleaning agent need to add 40-60C, ultrasonic use.The M-8213 is suitable for ultrasonic cleaning process.