M-2681 General Wax Removal Water

-- Product Features--◆ Ultra-concentrated, using 3-5%, low cost.◆ It has the characteristics of rapid penetration and disintegration of waxy dirt on the metal surface, so as to achieve rapid and complete wax removal.◆ No corrosion to the substrate, versatility, can be used for steel, stainless steel, aluminum alloy, zinc alloy and other materials in addition to wax cleaning.◆ With ultrasonic heating 65-80°C the best effect.◆Strong solubility to wax, long service life.

M-2684 Weld Spot and Wax Removal Agent

-- Product Features--◆ M-2684 solder spot wax remover is made of a variety of inorganic acids, organic acids, wax removal surfactants, penetrants, dispersants, stripping agents and other raw materials.◆ M-2684 spot wax remover has good softening, dissolving, emulsifying, peeling and dispersing effect on waxy dirt, achieving the effect of rapid wax removal.◆ According to the chemical composition characteristics of the oxide skin at the welding place of stainless steel, the wax remover is M-2684 to remove the high temperature oxide at the welding place while removing the wax, so as to achieve the effect of bright wax removal.◆ M-2684 spot and wax remover with appropriate amount of heating 50-70 C, ultrasonic effect is the best.◆ M-2684 spot wax remover is suitable for ultrasonic wax removal process.

M-2683 stainless steel wax remover

-- Product Features--◆ M-2683 stainless steel wax remover is made of a variety of high-efficiency wax removal surfactants, organic acids, complexing agents, penetrating agents, wax soluble agents, brighteners, and scientific compound reactions.According to the chemical characteristics of stainless steel material, the M-2683 stainless steel wax remover is a special wax remover for stainless steel, which has no corrosion to stainless steel and has certain bright effect.◆ Through the comprehensive application of wax dirt dissolution-penetration-emulsification-disintegration-dispersion, rapid and complete wax removal can be achieved.◆ M-2683 stainless steel wax remover can also remove the fingerprints and a small amount of oxide layer on the surface of stainless steel, which has a certain brightness on the surface of stainless steel◆ M-2683 stainless steel wax remover needs to be the best under the condition of heating 65-80 ℃ ultrasonic.◆ M-2683 stainless steel wax remover is super concentrated wax remover, which can be used 20-30 times as much as water.◆ Suitable for soaking or ultrasonic wax removal process.

Wax remover for M-2682 alloy

-- Product Features--◆ M-2682 alloy wax remover is composed of a variety of high-efficiency wax remover, wax dissolving agent, wax dispersant, water softener, penetrant, corrosion inhibitor and other scientific compounding.◆ M-2682 alloy wax remover will not corrode the surfaces of various copper, aluminum, zinc and magnesium alloys, and the surface will not change color or hang ash after wax removal.◆ M-2682 alloy wax remover has excellent emulsification, dissolution and dispersion effects on various waxy dirt after polishing, so as to achieve fast and efficient wax removal. The surface wax scale is removed in 1-2 minutes, and the groove wax scale is accumulated in 3-5 minutes.◆ M-2682 alloy wax remover is a super concentrated product, which can be diluted with water 20-30 times.◆ M-2682 alloy wax remover needs to be heated to 65-80 ℃, ultrasonic effect is the best.◆ M-2682 alloy wax remover is suitable for immersion or ultrasonic process.

M-2628A oil and wax removal powder

-- Product Features--◆ M-2628A degreasing and wax removal powder is composed of various degreasing active agents, wax removal active agents, inorganic salts, complexing agents, penetrating agents, diffusing agents, wax dissolving agents and other raw materials.◆ According to the chemical and physical properties of the oil and wax mixture, the oil and wax removal powder is M-2628A to solve the two-in-one oil and wax removal.◆ M-2628A degreasing and wax removal powder has a good removal effect on wax and oil mixed with oil or dirt, and is especially suitable for cleaning after the processing of steel or stainless steel drawn metal die casting release oil and metal fittings polishing machine.◆ According to different cleaning processes, different subdivision models of degreasing and wax removal powder are selected, and M-2628A-1 type and M-2628A-1 type are selected for spraying process. Soaking or ultrasonic process selects M-2628A-2 type.◆ M-2628A degreasing and wax removal powder is suitable for heating 40-70 ℃.Suitable for spray, immersion, ultrasonic process.

M-3526 immersion type silane treatment agent

-- Product Features--◆ M-3526 silane treatment agent has very good antirust performance.◆ In view of the problems of product overlap and long water drying time before soaking, the M-3526 of silane treatment agent can well solve the problem of rust return at overlapping positions.◆ The appearance of the conversion film formed by M-3526 treatment is colorless and transparent.◆ No water washing, after M-3526 silane treatment without water washing, water washing to reduce its rust resistance.◆ Environmentally friendly treatment process, no phosphorus and heavy metals.The use of the process completely no slag.It has good compatibility with various coatings, provides excellent binding force for the coating, and improves the corrosion resistance of the coating.◆ The process control is simple and easy, and the quality requirements can be met by controlling PH value = 7.5-8.5.

M-3523 water-washed silane treatment agent

-- Product Features--The M-3523 silane treatment agent through the high activity of the compound bond and the metal substrate firmly bonded.◆ Because the M-3523 silane conversion film has a strong binding force with the substrate, it can be washed with water, and it still has good antirust performance after washing.◆ Water washing after silane treatment can prevent water marks and imprints caused by silane residues, and at the same time solve the problem that silane treatment process cannot be used for water.◆ M-3523 silane treatment agent can be well matched with various coatings to increase coating adhesion and corrosion resistance.The use of the process completely no slag, more energy saving and more environmentally friendly.◆ For coating appearance requirements higher pre-coating treatment.Suitable for steel, galvanized sheet, aluminum and other metal material processing.◆ The process control is simple and easy, and the process requirements can be met by controlling PH = 8.0-9.0.

M-3521 silane treatment agent

-- Product Features--◆ new environmental protection pretreatment process, no phosphorus, no heavy metals, used to replace the traditional phosphating process.◆ No water washing, direct drying without water washing after silane conversion, simplified process.The processing time is short, only 20 seconds to complete the silane conversion film.◆ Silane conversion bare film rust resistance and iron phosphating (color phosphorus), lower than zinc phosphating (gray phosphorus).◆ After the silane conversion film only needs to be coated (painting and powder spraying), the coating adhesion and impact resistance are better than phosphating, and the salt spray resistance test of the coating is better than iron phosphating, which is equivalent to zinc phosphating.◆ can be used for spray or immersion treatment.

M-3501 silane ceramic agent (spray)

-- Product Features--◆ Upgraded product of ceramic agent, silane coupling agent and ceramic liquid reaction compound, compared with ordinary ceramic liquid, has better antirust performance and material adaptability.◆ Suitable for steel, galvanized sheet, aluminum coating before the treatment, to increase the coating adhesion and coating corrosion resistance.◆ No phosphorus, no heavy metals, no sediment, wastewater treatment is simple, easy to meet the discharge standards, is used to replace the traditional phosphating environment-friendly new process.The formation of ceramic bare film rust time is 3-5 days, and iron phosphating (also known as color phosphorus), but lower than the zinc phosphating (also known as gray phosphorus).◆ After coating (painting, powder spraying or electrophoresis), the coating adhesion, impact resistance and salt spray resistance are higher than those of phosphating film (including zinc phosphating and iron phosphating).◆ Because the ceramic film formed is very dense and smooth, the appearance flatness, gloss and one-time pass rate of the coating are better than those of the phosphating process. v

M-3529 ceramic sealant

-- Product Features--◆ M-3529 sealant has good rust resistance and can be used for rust prevention of steel.◆ M-3529 sealer has good binding force with various coatings and can be used for anti-rust treatment before coating.◆ M-3529 sealant can be used to strengthen anti-rust treatment after ceramic or phosphating to further improve its anti-rust performance, and the anti-rust time can be increased by 2-3 times after sealing treatment.◆ It is especially suitable for the closed anti-rust of the tank immersion type ceramic or the ceramic process after rust removal, so as to adapt to the tank immersion type ceramic process.◆ M-3529 sealer is a water-free sealer, and water washing is not required after sealing treatment.◆ M-3529 sealer should be prepared with pure water, and a water washing tank before the sealing process should also be washed with pure water to ensure better quality.

M-3503 Silane Ceramics (Electrophoresis)

-- Product Features--Cathodic electrophoresis special ceramic agent, M-3503 ceramic film has good conductivity and acid and alkali resistance.◆ Enhance the binding force of cathodic electrophoretic coating:Adhesion 100 test level 0;The impact resistance test of 50kg · cm was passed.◆ Enhance the corrosion resistance of the cathodic electrophoretic coating, and the electrophoretic coating is resistant to neutral salt spray for 1000 hours.◆ A small amount of sediment will be produced during use, and the ceramic tank needs to be equipped with a filtering system for better results.Environmental protection process, no phosphorus and heavy metals, replace the traditional ternary phosphating new process.◆ The adhesion and impact force of electrophoretic coating are better than those of traditional ternary phosphating, and the neutral salt spray resistance is equivalent to ternary phosphating.

M-3502 high anti-rust silane ceramic agent (soaking)

-- Product Features--◆ M-3502 silane ceramic agent has very good anti-rust performance, ceramic bare film storage 8-10 days does not rust, is 2-3 times the ordinary ceramic anti-rust ability.◆ Because of its good anti-rust performance, M-3502 silane ceramic agent can be used for immersion treatment.◆ Because of its good anti-rust performance, M-3502 silane ceramic has good adaptability to carbon gray board.